Printable Ring Sizer: Find Your Ring Size & International Ring Size Chart

The best and most accurate way to find a ring size is to have your finger professionally measured with a ring in the same millimeter (mm) width as the ring you are considering purchasing. Many of our customers have found that trying on wedding bands in different widths is the easiest way to determine their exact ring size.

 

Enlarge and Print

Some customers have also found the above free printable ring sizer to be a helpful guide to determining ring size. In order to print the ring sizer on this page, be sure that your printer is set to 100%. In other words, make sure that you have not reduced the print size in print page set up or preferences. You can verify that the sizer printed correctly by measuring it with a ruler; it should measure from left to right: 3 3/8 inches.

Once you have printed the ring sizer, you may cut it out and use it or try the following directions to find your ring size:

Wrap a piece of loose string around your finger. Be sure to allow for the size of your knuckle.

1. With a pen, mark the point on the string where the end meets.
2. Using the chart, place the end of the string on the left hand line next to the letter "A" and stretch the string along the ring sizer toward the numbers.
3. The pen mark on your string should line up with a number to indicate your ring size.
4. Below find a chart of ring size conversions for the convenience of our international customers. 

Shop our large collection of over 1,000 unique estate, antique, and vintage ring styles!  ➤

International Ring Size Chart

USA & Canada	Diameter ( inches )	Diameter ( mm )	Great Britain & Australia	France	Germany	Japan	Switzerland
000	0.390	9.906	---	---	---	---	---
00	0.422	10.719	---	---	---	---	---
0	0.454	11.532	---	---	---	---	---
1/2	0.462	11.735	A	---	---	---	---
3/4	0.471	11.963	A-1/2	---	---	---	---
1	0.487	12.370	B	---	---	1	---
1 1/4	0.495	12.573	B-1/2	---	---	---	---
1 1/2	0.503	12.776	C	---	---	---	---
1 3/4	0.511	12.979	C-1/2	---	---	---	---
2	0.520	13.208	D	41 1/2	13 1/4	2	1 1/2
2 1/4	0.528	13.411	D-1/2	42 1/8	13 1/2	---	---
2 1/2	0.536	13.614	E	42 3/4	13 3/4	3	2 3/4
2 3/8	0.544	13.818	E- 1/2	43 3/8	---	---	3 3/8
3	0.553	14.046	F	44	14	4	4
3 1/4	0.561	14.249	F-1/2	44 5/8	14 1/4	---	4 5/8
3 1/2	0.569	14.453	G	45 1/4	14 1/2	5	5 1/4
3 3/4	0.577	14.656	G-1/2	45 7/8	14 3/4	6	5 7/8
4	0.586	14.884	H-1/2	46 1/2	15	7	6 1/2
4 1/4	0.594	15.088	I	47 1/8	15 1/4	---	7 1/8
4 1/2	0.602	15.291	I-1/2	47 3/4	15 1/2	8	7 3/4
4 3/4	0.610	15.494	J	48 3/8	---	---	8 3/8
5	0.619	15.723	J-1/2	49	15 3/4	9	9
5 1/4	0.627	15.926	K	49 5/8	16	---	9 5/8
5 1/2	0.635	16.129	K-1/2	50 1/4	16 1/4	10	10 1/4
5 3/4	0.643	16.332	L	50 7/8	---	11	10 7/8
6	0.652	16.561	L-1/2	51 1/2	16 1/2	12	11 1/2
6 1/4	0.660	16.764	M	52 1/8	16 3/4	---	12 1/8
6 1/2	0.668	16.967	M-1/2	52 3/4	17	13	12 3/4
6 3/4	0.676	17.170	N	53 3/8	---	---	13 3/8
7	0.685	17.399	O	54	17 1/4	14	14
7 1/4	0.693	17.602	O-1/2	54 5/8	17 1/2	---	14 5/8
7 1/2	0.701	17.805	P	55 1/4	17 3/4	15	15 1/4
7 3/4	0.709	18.009	P-1/2	55 7/8	---	---	15 7/8
8	0.717	18.212	Q	56 1/2	18	16	16 1/2
8 1/4	0.726	18.440	Q-1/2	57 1/8	18 1/4	---	17 1/8
8 1/2	0.734	18.644	R	57 3/4	18 1/2	17	17 3/4
8 3/4	0.742	18.847	R-1/2	58 3/8	18 3/4	---	18 3/8
9	0.750	19.050	S	59	19	18	19
9 1/4	0.759	19.279	S-1/2	59 5/8	19 1/4	---	19 5/8
9 1/2	0.767	19.482	---	60 1/4	19 1/2	19	20 1/4
9 3/4	0.775	19.685	T	60 7/8	19 3/4	---	20 7/8
10	0.783	19.888	T-1/2	61 1/2	20	20	21 1/2
10 1/4	0.792	20.117	U	62 1/8	20 1/4	21	22 1/8
10 1/2	0.800	20.320	U-1/2	62 3/4	20 1/2	22	22 3/4
10 3/4	0.808	20.523	V	63 3/8	---	---	23 3/8
11	0.816	20.726	V-1/2	64	20 3/4	23	24
11 1/4	0.825	20.955	W	64 5/8	---	---	24 5/8
11 1/2	0.833	21.158	W-1/2	65 1/4	21	24	25 1/4
11 3/4	0.841	21.361	X	65 7/8	---	---	25 7/8
12	0.849	21.565	Y	66 1/2	21 1/4	25	26 1/2
12 1/4	0.858	21.793	Y-1/2	67 1/8	21 1/2	---	27 1/8
12 1/2	0.866	21.996	Z	67 3/4	21 3/4	26	27 3/4
12 3/4	0.874	22.200	Z-1/2	68 3/8	---	---	28 3/8
13	0.882	22.403	---	69	22	27	29

Learn more about International Orders.